Go Bottom4110 grease points
 | aemiller
Join Date: May 2004 Posts: 11 Mount Pleasant, SC 
|
2004-07-12 90652
I just got my 4110, and what a fantastic machine it is!
My question is in regards to grease points on the machine. The manual points out about 7 spots that should be greased with a grease gun, but my tractor did not look the same as the photos in the manual. Since the manual is for the 4110 and 4115, I am guessing that maybe some of the photos are of a 4115 and that is the difference, however, it seems it would have made mention of this. Did anyone else have problems locating all the grease points that the manual shows?
Reply to |
Quote Reply |
Add Photo4110 grease points
 | DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada 
 Pics
|
2004-07-12 90657
The 4110 Gear has different grease points than a 4110/4115 HST. Make sure you are looking at the correct picture.
I count 9 grease gun points on an HST model. ....
Reply to |
Quote Reply |
Add Photo4110 grease points
| bobggg
Join Date: Jul 2003 Posts: 34 washington state
|
2004-07-18 91231
I have the 4110 HST and came up with following from my manual:
3 front end
2 power steering
2 brake pedal
The manual also shows cruise control and park brake fittings which I don't have.
In talking to the service guy, he says do not fill the tie rod fittings until you see grease ooze...only fill until you see the little rubber boots swell. And the axil pivot pin fitting does not ooze...fill to resistance. ....
Reply to |
Quote Reply |
Add Photo4110 grease points
| bobggg
Join Date: Jul 2003 Posts: 34 washington state
|
2004-07-20 91493
My manual is for the 4110 & 4115, so I dropped by my dealer and checked both models out. The 4110 does not have the cruise control and parking brake fittings whereas the 4115 does. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This